bobshellzjkhx

First and foremost, when we start to use  Wooden Pellet Machines , we have to investigate whether the power supply of the machine has electricity. This is not only to maintain the machine, but also to maintain the personal safety of the person. If the power supply is not touched well, the machine may be largely Adapter and host burned. Secondly, according to different products, different machine words are used to carry out certain maintenance on the host, and the host power is adjusted to maintain the host and increase the service life. In the end, during the operation of the machine, do not shake the machine. If you suddenly shake, then the screen hole will follow the shaking. The particles that are filtered out will not pass our specifications. We are  Wooden Pellet Machines Suppliers . If you have any questions, please contact us.

The pressure roller continuously squeezes the biomass material into the ring mold hole to achieve the purpose of particle molding. The pressure roller keeps moving and friction during the work. Therefore, the operating temperature of the pressure roller is very high. It is necessary to supply oil and heat in a timely and reasonable manner to effectively extend the service life of the pressure roller, increase the service life of the pressure roller, and increase the working output. The maintenance of the biomass  pellet mill ring die  needs to be cleaned once with gasoline or diesel oil for 30 days, and at the same time, the grease is injected. During work, it is necessary to ensure that there are no hard materials such as stones and iron scraps in the raw material, so as to avoid damage to the biomass pellet machine ring mold. . In winter, the biomass pelletizer and ring mold must be preheated prior to processing. Because the weather is cold and the stability is poor, the wa...

The  ring die for Pellet Mill  is an important part of the biomass particle machine. The ring mold affects the quality of the particles of the biomass particles, the particle molding conditions, and the production efficiency. Therefore, the maintenance of the ring mold is very important, then the following will introduce the maintenance of the biomass particle machine ring mold attention. Whether  customized ring die  is a new device or a new one, it must be thoroughly ground before use. Generally can be used waste oil, sand, sawdust according to a certain proportion of mixing into the reusable oil, in the biomass particle machine inlet into the oil, repeated grinding 20-30 minutes after the input material can be normal production. The ring mold and the press roll are labor-intensive and heavy-loaded. In the vicinity of the rated life of the pressure roller and the ring die, follow-up monitoring will be carried out. The frequency and particle quality of the partic...

Roller shell plays an important role for granulator.  Customized Roller Shell ,  Casting Steel Roller Shell  can be found on our website. A feeding system with a combination of a pre-continuous feeder with a mechanical vibratory device and a forced-feed screw hopper ensures the continuity, adequacy and uniformity of feeding, which is a crucial step. The roller granulator engraves the uniform arc groove on the pair of rollers, which is beneficial to the material biting into the roller, forming the arc groove sealing chamber (band) during the work, and also conducive to the compaction of the material, reducing the forming pressure of the unit and the host The load improves the productivity of the pellets. The roll granulator is also equipped with automatic pressure compensating and pressing device for rolling sheet forming hydraulics, sight glass and so on. After the powdery material passes through the bucket elevator, the entire process can be completed in one go from fee...

The roller granulator uses two relatively movable rollers for extrusion molding. There is a certain gap (adjustable) between the two rollers and the two rotate at the same rotation speed. One set of roll shaft seats is fixed and the other set of roll shaft seats is slid to help the cylinders press each other against each other.  Casting steel roller shell  is a good choice. The surface of the roll is regularly arranged with many arc grooves of the same shape and size. The two rolls are horizontally parallel. The powdery granular material is continuously and evenly weighed on both rolls and pressed between the rolls by a forced feeder to roll granulation. The machine is formed under the high pressure of two rollers. Next, it enters the shredding device to break the pellets, and then the screening machine sifted out the finished granules. The screened out defective products can be put into the feeding port again for secondary granulation. The shape of the particles depends on t...

There are  roller shell for feed machinery ,  ring die for feed machinery  on our website. In this news, we will talk about how to select the ring die and roller shell. 1. The material of the ring die is generally carbon steel, alloy structural steel or stainless steel. The material of the ring die can be selected according to the corrosivity of the material and the work strength of the ring die. Generally, stainless steel is selected for the highly corrosive material and the ring die with a small ring die. The material of the press roll is generally selected from carbon steel or alloy structural steel. Can be toothed or recessed. 2. The compression ratio of the ring mode. The compression ratio of the ring die refers to the ratio of the effective working length of the ring die to the die hole diameter. The compression ratio of the ring die can be selected according to the raw material formulation and product requirements. Low compression ratios increase production, r...