Difference Between Flat Die Granulator and Ring Die Granulator

Do you know the difference between flat die granulator and ring die granulator?
Flat Die Granulator and Ring Die Granulator supplier
Feeding mode: ring die granulator using mechanical forced feeding, high-speed rotation centrifugal distribution into the granulation chamber, through the scraper to distribute the material, feeding uneven; flat die granulator is the vertical weight of the material into the press room , Can feed evenly. Discharge mode: ring mold is a high speed, the material is damaged when the discharge rate is high; and the flat mold is a low speed, low damage rate. Pressure roller adjustment mode: If the ring die granulator with the middle of the pressure roller eccentric screw on the two to adjust the pressure; flat die granulator is the use of thread center adjustment mechanism, the top 100 tons, the whereabouts of a smooth, touch Hit the soft, uniform pressure.

评论

发表评论

此博客中的热门博文

Tips for Using Biomass Pellet Machines Part B

图片
The pressure roller continuously squeezes the biomass material into the ring mold hole to achieve the purpose of particle molding. The pressure roller keeps moving and friction during the work. Therefore, the operating temperature of the pressure roller is very high. It is necessary to supply oil and heat in a timely and reasonable manner to effectively extend the service life of the pressure roller, increase the service life of the pressure roller, and increase the working output. The maintenance of the biomass  pellet mill ring die  needs to be cleaned once with gasoline or diesel oil for 30 days, and at the same time, the grease is injected. During work, it is necessary to ensure that there are no hard materials such as stones and iron scraps in the raw material, so as to avoid damage to the biomass pellet machine ring mold. . In winter, the biomass pelletizer and ring mold must be preheated prior to processing. Because the weather is cold and the stability is poor, the wa...
阅读全文

How to Increase Output Of The Granulator?

图片
In order to increase production of granulator, it is necessary to pay attention to some details of the use of materials. 1. Pay attention to the bulk quality of the material. In general, the greater the volume and mass of the material, the higher the yield of pellets. Therefore, formula personnel must consider the bulk density of the material in addition to the nutrient requirements when selecting raw materials. 2. It should be noted that the particle size of the material is fine, the specific surface area is large, the vapor absorption is fast, and it is beneficial to the regulation of moisture, and the granulation mechanism yields high yields. However, when the particle size is too small, the particles are fragile and affect the quality of the particles. If the particle size is too large, the wear of the die and the pressure roller will increase, the energy consumption will increase, and the yield will decrease. In general, the size of the pig material should pass through a 3 mm...
阅读全文

Roller Shell Repair

图片
According to past experience, the final stage of a typical cast roll is to grind and repair the rolls in about 14 days or when the output reaches 450 tons; of course, due to different plate types, different alloy grades, different cooling water, and roll sleeves. Different materials and other factors will affect the final time. Hongxing specializes in the production of roller shell, which can be used for roll repair, roll grinding and roll changing. Our company has strong technical force and high-precision production capacity and high-quality after-sales service team. Main products are  customized roller shell ,  customized ring die /flat die. The products have been appreciated and recognized by new and old customers. Currently, the products are sold well throughout the country and are exported to overseas regions.
阅读全文