FAQ of Granulators

Granulation granulation fast, good effect, the design of a special hole filter, carefully sieved; granules in the granulator production, sometimes appear abnormal appearance of particles.

granulators roller shell

1, A single particle or individual particle color inconsistencies, commonly known as "Flower material"; Mainly for the color of the individual particles extruded from the ring die than other normal particles; The improvement method is mainly to control the mixing uniformity of each component in the formulation.
2, The granular material is curved and presents many cracks on one side; In production, when the cutter position is adjusted away from the surface of the mold ring and the edge more; improvement methods are: increase ring die on the feed.

Hongxing provides high precision granulators roller shell, granulators flat die and granulators ring die.

评论

发表评论

此博客中的热门博文

Installing And Operating Tips of Wooden Pellet Machine

图片
First and foremost, when we start to use  Wooden Pellet Machines , we have to investigate whether the power supply of the machine has electricity. This is not only to maintain the machine, but also to maintain the personal safety of the person. If the power supply is not touched well, the machine may be largely Adapter and host burned. Secondly, according to different products, different machine words are used to carry out certain maintenance on the host, and the host power is adjusted to maintain the host and increase the service life. In the end, during the operation of the machine, do not shake the machine. If you suddenly shake, then the screen hole will follow the shaking. The particles that are filtered out will not pass our specifications. We are  Wooden Pellet Machines Suppliers . If you have any questions, please contact us.
阅读全文

Double Roller Shell Granulator Working Principle

图片
The roller granulator uses two relatively movable rollers for extrusion molding. There is a certain gap (adjustable) between the two rollers and the two rotate at the same rotation speed. One set of roll shaft seats is fixed and the other set of roll shaft seats is slid to help the cylinders press each other against each other.  Casting steel roller shell  is a good choice. The surface of the roll is regularly arranged with many arc grooves of the same shape and size. The two rolls are horizontally parallel. The powdery granular material is continuously and evenly weighed on both rolls and pressed between the rolls by a forced feeder to roll granulation. The machine is formed under the high pressure of two rollers. Next, it enters the shredding device to break the pellets, and then the screening machine sifted out the finished granules. The screened out defective products can be put into the feeding port again for secondary granulation. The shape of the particles depends on t...
阅读全文

Tips for Using Biomass Pellet Machines Part B

图片
The pressure roller continuously squeezes the biomass material into the ring mold hole to achieve the purpose of particle molding. The pressure roller keeps moving and friction during the work. Therefore, the operating temperature of the pressure roller is very high. It is necessary to supply oil and heat in a timely and reasonable manner to effectively extend the service life of the pressure roller, increase the service life of the pressure roller, and increase the working output. The maintenance of the biomass  pellet mill ring die  needs to be cleaned once with gasoline or diesel oil for 30 days, and at the same time, the grease is injected. During work, it is necessary to ensure that there are no hard materials such as stones and iron scraps in the raw material, so as to avoid damage to the biomass pellet machine ring mold. . In winter, the biomass pelletizer and ring mold must be preheated prior to processing. Because the weather is cold and the stability is poor, the wa...
阅读全文