bobshellzjkhx

First and foremost, when we start to use  Wooden Pellet Machines , we have to investigate whether the power supply of the machine has electricity. This is not only to maintain the machine, but also to maintain the personal safety of the person. If the power supply is not touched well, the machine may be largely Adapter and host burned. Secondly, according to different products, different machine words are used to carry out certain maintenance on the host, and the host power is adjusted to maintain the host and increase the service life. In the end, during the operation of the machine, do not shake the machine. If you suddenly shake, then the screen hole will follow the shaking. The particles that are filtered out will not pass our specifications. We are  Wooden Pellet Machines Suppliers . If you have any questions, please contact us.

The pressure roller continuously squeezes the biomass material into the ring mold hole to achieve the purpose of particle molding. The pressure roller keeps moving and friction during the work. Therefore, the operating temperature of the pressure roller is very high. It is necessary to supply oil and heat in a timely and reasonable manner to effectively extend the service life of the pressure roller, increase the service life of the pressure roller, and increase the working output. The maintenance of the biomass  pellet mill ring die  needs to be cleaned once with gasoline or diesel oil for 30 days, and at the same time, the grease is injected. During work, it is necessary to ensure that there are no hard materials such as stones and iron scraps in the raw material, so as to avoid damage to the biomass pellet machine ring mold. . In winter, the biomass pelletizer and ring mold must be preheated prior to processing. Because the weather is cold and the stability is poor, the wa...

The  ring die for Pellet Mill  is an important part of the biomass particle machine. The ring mold affects the quality of the particles of the biomass particles, the particle molding conditions, and the production efficiency. Therefore, the maintenance of the ring mold is very important, then the following will introduce the maintenance of the biomass particle machine ring mold attention. Whether  customized ring die  is a new device or a new one, it must be thoroughly ground before use. Generally can be used waste oil, sand, sawdust according to a certain proportion of mixing into the reusable oil, in the biomass particle machine inlet into the oil, repeated grinding 20-30 minutes after the input material can be normal production. The ring mold and the press roll are labor-intensive and heavy-loaded. In the vicinity of the rated life of the pressure roller and the ring die, follow-up monitoring will be carried out. The frequency and particle quality of the partic...

Roller shell plays an important role for granulator.  Customized Roller Shell ,  Casting Steel Roller Shell  can be found on our website. A feeding system with a combination of a pre-continuous feeder with a mechanical vibratory device and a forced-feed screw hopper ensures the continuity, adequacy and uniformity of feeding, which is a crucial step. The roller granulator engraves the uniform arc groove on the pair of rollers, which is beneficial to the material biting into the roller, forming the arc groove sealing chamber (band) during the work, and also conducive to the compaction of the material, reducing the forming pressure of the unit and the host The load improves the productivity of the pellets. The roll granulator is also equipped with automatic pressure compensating and pressing device for rolling sheet forming hydraulics, sight glass and so on. After the powdery material passes through the bucket elevator, the entire process can be completed in one go from fee...

The roller granulator uses two relatively movable rollers for extrusion molding. There is a certain gap (adjustable) between the two rollers and the two rotate at the same rotation speed. One set of roll shaft seats is fixed and the other set of roll shaft seats is slid to help the cylinders press each other against each other.  Casting steel roller shell  is a good choice. The surface of the roll is regularly arranged with many arc grooves of the same shape and size. The two rolls are horizontally parallel. The powdery granular material is continuously and evenly weighed on both rolls and pressed between the rolls by a forced feeder to roll granulation. The machine is formed under the high pressure of two rollers. Next, it enters the shredding device to break the pellets, and then the screening machine sifted out the finished granules. The screened out defective products can be put into the feeding port again for secondary granulation. The shape of the particles depends on t...

There are  roller shell for feed machinery ,  ring die for feed machinery  on our website. In this news, we will talk about how to select the ring die and roller shell. 1. The material of the ring die is generally carbon steel, alloy structural steel or stainless steel. The material of the ring die can be selected according to the corrosivity of the material and the work strength of the ring die. Generally, stainless steel is selected for the highly corrosive material and the ring die with a small ring die. The material of the press roll is generally selected from carbon steel or alloy structural steel. Can be toothed or recessed. 2. The compression ratio of the ring mode. The compression ratio of the ring die refers to the ratio of the effective working length of the ring die to the die hole diameter. The compression ratio of the ring die can be selected according to the raw material formulation and product requirements. Low compression ratios increase production, r...

Hongxing,  wooden pellet mill  and Biological granulator manufacturer, will tell you the accurate operation and maintenance of granulator in this article. 1. Accurate device or changing the ring die and press roller The new model is equipped with a new roller, and the old one is equipped with the old roller, so that the external appearance of the ring die and the press roller is close to the external shape of the imitation, and the gap between the ring die and the press roller Mostly similar. In this way, all ring molds are very evenly loaded and discharged, which can improve the effectiveness of consumption. 2. The team maintenance and granulation machine should do a pre-class review every shift, review each transmission component, instrument, and valve, and add smooth oil based on lithium to smooth oil and iron scraps on the iron. 3. Adjustment of  Ring Die  and Roller Gap With regard to the adjustment of the new ring die and nip roller gap, the ring die and...

In order to increase production of granulator, it is necessary to pay attention to some details of the use of materials. 1. Pay attention to the bulk quality of the material. In general, the greater the volume and mass of the material, the higher the yield of pellets. Therefore, formula personnel must consider the bulk density of the material in addition to the nutrient requirements when selecting raw materials. 2. It should be noted that the particle size of the material is fine, the specific surface area is large, the vapor absorption is fast, and it is beneficial to the regulation of moisture, and the granulation mechanism yields high yields. However, when the particle size is too small, the particles are fragile and affect the quality of the particles. If the particle size is too large, the wear of the die and the pressure roller will increase, the energy consumption will increase, and the yield will decrease. In general, the size of the pig material should pass through a 3 mm...

Hongxing supplies high quality  wooden pellet mill  and  Pellet Mill Spare Parts  with high quality. In this article, we will talk about classification of Granulator. Granulator series products are commonly used in food, pharmaceutical, chemical and other industries. Granulators are divided into dry granulation and wet granulation: 1. Wet granulation: The dry powder granulation needs to add binders (such as water, starch, etc.). After granulation, it needs to enter the drying oven for drying. Commonly used in the manufacture of granules, such as cold granules, Banlangen granules, beverage granules, traditional Chinese medicine granules, chicken essence, water dispersant and other tens of thousands of materials. 2. Dry granulation: The dry powder system can be directly caused particles, no adhesive, no drying. Applicable to the production of tableting granules, increase material accumulation and sealing, change the phenomenon of feeding dust, increase the materia...

In this article, we will talk about comparisons of  Corrugated Roller Shell  and Dimpled Roller Shell. ● The benefit of dimpled roller casing is that the even sporting of ring expire or horizontal perish, but bad spiral performance. ● Corrugated roller casing is of great coil functionality, however, the wearing of this die isn't even. ● Closed ends corrugated roller shell  is chiefly used for producing aquafeed. Because corrugated roller shell having closed endings can decrease slippage of substances when being extruded and give resistance to hammering the perish. Roller shell is the top layer of roller gathering in which raw materials are pushed against the expire. It may be utilized on pellet equipment to earn types of feed pellets, fuel pellets or other types of pellets. Corrugated roller shell and dimpled roller shell would be the largely used types from the poultry and livestock feed pelleting and biomass pelleting market.

Feed pellets machine is a common problem  Feed Pellets Roller Shell  problems, feed pellets roller shell over-operation will cause bearing damage, running too fast can also lead to this problem. If there is a sound in use, it may indicate that the feed pellets have a chance to fail. At this time, we will replace the feed pellets roller shell. If the phenomenon is very obvious, the feed particles have a lot of shaking or the parts stop rotating, which means that the feed pellets roller shell need to be replaced. Please do not overuse and use the machine improperly. Do not use it when it is wet.  has professional technology and high quality  Spare Parts of Feed Machinery . Welcome to contact us .

Corrugated Roll Shell  packaging can be divided into two kinds of inner packaging and outer packaging. The packaged Corrugated Roll Shell can be waterproof, moisture-proof, dust-proof, shock-proof, maintain the quality and accuracy of the Corrugated Roll Shell, and be convenient for use and sale. When packing roll shell products with inner packing into the box, the box should be first filled with plastic bags or plastic film; if there is any gap in the box, it should be filled with dry materials such as corrugated blocks and paper scraps. The inner packaging material of the roll shell is polyethylene plastic box (carton), kraft paper, plain and wrinkle polyethylene composite paper, carton, polyethylene or polyethylene plastic film, nylon fastening tape or plastic fastening tape, waterproof high-strength plastic tape. , linen bags and so on. The above materials are required to ensure that the material is tested for corrosion resistance. Corrugated Roll Shell Manufacturer ...

Long Life Roller Shell  eliminates the need to remove or repair all parts of a single shaft for maintenance or replacement, significantly reducing replacement time. Long Life Roller Shell. At the same time, long-life bearings further extend normal operating hours, allowing them to be replaced at longer intervals. Long-life bearings have excellent sealing and efficient energy efficiency, with a sturdy metal bracket, perfect for underground applications and other challenging environments. Zhangjiakou Hongxing Machinery Co.,Ltd is a leading designer and  Long Life Roller Shell Supplier , providing a wide and diverse market needs, welcome to contact us!

We have know some knowledge about  wood pellet machine . Today we will talk about how the wood pellets are made? Wood chips or wastes is easily available for pelleting mill. First of all, wood crusher is required to grind the massive acacia wood pieces into sawdust. Due to the high moisture content, the sawdust should be processed from the conveyer and rotary drum dryer. Drying is made possible by YULONG which is effective at drying sawdust to moisture level of less than 18%. This create the wood pellets reach a high performance rate. The ring expire pelleting mill is the next destination for the sawdust. The pelleting mill is a pellet making machine capable of mass producing biomass fuel pellets from several materials which include sawdust. Next the wood pellets have been taken to the cooler in which they are chilled and sieved. Sieving helps different poor quality pellets from the good quality ones. HONGXING, reliable  wood pellet machine manufacturer , will pro...

For the  biomass feed pellet roller shell  or wooden pellet mill roller shell, do you know how to prevent it from being obstructed? The residual stresses and thermal stresses occur in the preparation process before the roll is produced and used. When applied, it is further subjected to a variety of cyclical stress effects, including twists, changes, shear, contact stress and thermal stress. The distribution of these stresses along the roll body is uneven and constantly changing. The causes of roller shell are not only the planning elements but also the wear of the rolls during operation, the constant changes in temperature and roll shape. In addition, rolling conditions often exhibit abnormal conditions.During the roller shells,  stainless steel roller shell  is widely used. The operating conditions of the rolls in the rolling mill parts are the most messy. Roller cooling after use is not properly, but also by the thermal stress. Therefore, in addition to wear...

HONGXING will attend the 13th China Machinery & Electronic Brand Show(Indonesia) at the beginning of May, 2018. Here we will display our wooden pellet machine,  roller shell , ring die and flat die. Hope to see you there and welcome follow up our website more further information. Trade Fair information: The 13th China Machinery & Electronic Brand Show(Indonesia) Booth No.:137 Address：Jakarta International Expo HONGXING is a professional  wooden pellet mill  machine and its spare parts manufacturer in China. We hope to create long business relationship with you.

A pellet mill, also called a pellet press, is a type of mill or machine press used to make pellets from powdered substance. Pellet mills are unlike grinding mills, because they blend small materials into a bigger, homogeneous mass, rather than split huge materials into smaller bits. One of the more common software would be to produce KBr pellets which are used in infrared spectroscopy applications. The common machine can be seen is  wood pellet mill . Animal feed pellets are normally a mixture of dry powdered feedstock, such as flour, sawdust, or bud, and a moist ingredient, such as molasses or vapor. Feedstocks for pellet mills can occasionally break down and after that re-form, or polymerize, below the extreme heat and pressure of the pellet mill. HONGXING provides high quality  wooden pellet machine  and other related pellet mill. Pls contact to us for further information.

After roller shell off the machine, grinding is usually performed after 24 hours to prevent cracking and dimensional deviation. During the roller shell and grinding process, the material, hardness, bonding agent, particle size and coolant of the grinding wheel should be reasonably selected. During the grinding process, the grinding burn of the roller is strictly prevented. The grinding burn is classified according to the severity as follows: the burn is not visible to the naked eye → the surface color changes → flaw detection Visible cracks → visible cracks → mesh turtle cracks skin → peeling. In the work roll grinding, each time the minimum amount of grinding should ensure that the fatigue layer is removed, the depth of this layer is generally 0.15-0.30mm. In roll grinding, it should be noted that the diameter difference of the mating roller shell must meet the design requirements. Any questions about  Stainless Steel Roller Shell ,  Casting Steel Roller Shell , pls ...

Roller shell includes  Stainless Steel Roller Shell  and Casting Steel Roller Shell. Before use, grease, dust, and rust should be removed from the surface before routine testing. In particular, the surface of the roll body and roll neck should be carefully inspected for defects such as scratches, indentations, rust spots, and cracks. No roll with surface defects should be used on the machine. Before rolling, the surface quality, sheet composition, and hardness of the rolled billet should be carefully inspected. When the belt is to be connected, the interface must be smooth and free of projection. Roller cooling liquid should ensure uniform and sufficient cooling and lubrication of the roll during rolling, and prevent the hardness from falling or even cracking due to the high working temperature of the roll or local overheating. Roller diameter should be well lubricated and cooled to prevent overheat damage to the surface. The bearing system is to be lubricated and coo...

We can finish our work well once have a good management system. Today we will share the roller shell management. Before use, a roller shell use card shall be established to record the roll number, size, and roll. After the end of roll life, the roll will be used as the original record. The upper and lower rollers of the roller shell shall record the time of up and down the machine, the number of steel rolled, the specifications, the amount of rolling, and the reason of grinding (such as normal roll change, variable specification roll change, scratch, peeling, sticking steel, crack Wait. After every grinding of the roller shell, the starting time of grinding, the diameter before and after grinding, the amount of regrind and the reason of dressing should be recorded. According to the rolling material, a reasonable rolling process (rolling passes, single-pass reduction and rolling speed, etc.) is established, and a corresponding roll change system is established for different r...